DIY 16oz Monsters Inc. Scream Canister inspired RGB LED water bottle

Big Monsters Inc. fan !?
Then here’s your chance to own the most epic water bottles from GiveWave Studios. 3D printed & complete with multicolor RGB LED’s with on/off/color button, to quench your disney thirst ^_^

Made from super light weight, Eco-friendly PLA and is fitted snuggly to a reusable & machine washable PET water bottle.

NOTE: *RAW 3d parts can be cleaned up, sanded & painted to achieve your desired finish for an awesome clean look. Because they are 3d printed these should NEVER be machine washed, HAND WASH ONLY, as 3d prints can get deformed with heat.

DIsney not your thing? we also have an Ooze Booze TMNT canister, Danny Phantom thermos, Cyber Punk models as well. Check our other listings ^_^

*RAW: implies parts are taken straight from the printer to your shipping box. NO post processing is done to printed caps, therefore burrs & striation lines are inevitable. Hence the DIY nature of these props.
_____________________________________________

PRODUCT SPECS:

• 1x Clear Water Bottle ( 16 oz. )

• 1x LED RGB light puck

• 3x *RAW 3d printed parts ( RANDOM COLORS )

• 2x CR1220

• Youtube demo https://youtu.be/wiAu68hb1xA

INSTRUCTIONS:

• HAND WASH PRINTED CAPS ONLY … Clear container can be machine washed but 3d printed parts should NEVER go in the dishwasher.
• Remove/insert main long part from the top ONLY ( bottle has very subtle taper & inserting from bottom can damage your part )
• Carefully pull off bottom cap AKA the one with the hole in the bottom ( should be a tight fit, so twisting & pulling simultaneously can help )
• Remove LED puck from inside bottom of cap
• Remove plastic wrap LED puck is contained in ( if included )
• Remove white/clear battery protector tab to activate unit
• Press on/off button under puck to turn on/off & switch between solid colors & modes
• Place puck back into bottom cap and slide back on bottom of container nice and tight so that the puck is wedged well and doesn’t move when pressed.

_____________________________________________

NO RETURNS
Ready to ship in 7-10 days (for DIY) 2-3 weeks (for RTW)
From the United States

** DISCLAIMER ** This is NOT a licensed product. All GWS works are derivative & NOT officially associated with ANY 3rd party IP properties. It’s just fanart.