DIY Zoro EggHead 3d printed Jacket accessories

IDK bout you but Zoro has THE BEST EggHead outfit out of the entire crew ( fight me ) … So obviously I tackled his cosplay and these were some of the RAW* 3d printed parts I designed for it. You know, in case you wanna make the best fit from that arc too ^_^

All pieces have 10 mm recessed holes in the back suitable for Neodymium magnets ( so you can easily take them on off ) OR use some DIY blank pins ( https://amzn.to/4kGJzGr ) for a more permanent attachment.

*RAW: implies parts are taken straight from the printer to your shipping box. NO post processing is done to prints, therefore burrs & slight imperfections are inevitable. Prepping, sanding, priming, painting is necessary for a finished look, hence the DIY nature of these props.
_____________________________________________

PRODUCT SPECS:

FULL Set:

• X9 3d printed PLA parts ( random colors )
• 2x shoulders ( random colors )
• 4x arms ( random colors )
• 2x chest ( random colors )
• 1x crossbody belt buckle ( random colors )

Arm Set:

• X4 3d printed PLA parts ( random colors )

Shoulder Set:

• X2 3d printed PLA parts ( random colors )

Chest Set:

• X2 3d printed PLA parts ( random colors )

Belt Buckle:

• Fits 2.5 in. wide strap or smaller
• X1 3d printed PLA parts ( random colors )

_____________________________________________

NO RETURNS
Ready to ship in 7-10 days (for DIY) 2-3 weeks (for RTW)
From the United States

** DISCLAIMER ** This is NOT a licensed product. All GWS works are derivative & NOT officially associated with ANY 3rd party IP properties. It’s just fanart.