16oz Fenton Thermos LED Water Bottle Cosplay (cosplay, convention, costume, halloween)

Got a Danny Phantom or sci-fi related cosplay but no cool Fenton thermos ? GiveWave Studios’ has got you covered with awesome 3d printed light up prop.

Look no further than this awesome GiveWave studios original 3d printed “phantom thermos” water canister, complete with multicolor RGB LED’s and on/off button.

Made from super light weight, Eco-friendly PLA and is fitted snuggly to a reusable PET water bottle. Can be sanded, painted to your desired color for an awesome clean look.

Danny Phantom not your thing? we also have an ooze booze TMNT canister or you can use this as a prop for any Sci Fi or other related cosplay as well, makes for a great party favor ^_^

_____________________________________________

PRODUCT SPECS:

• 1x Clear Water Bottle ( 16 oz. )

• 1x LED RGB light puck

• 3x  3d printed parts ( random color )

• 2x CR1220

INSTRUCTIONS:
• HAND WASH PRINTED CAPS ONLY … Clear container can be machine washed but 3d printed parts should NEVER go in the dish washer.
• Remove/insert main long part from the top ONLY ( bottle has very subtle taper & inserting from bottom can damage your part )
• Carefully pull off bottom cap AKA the one with the hole in the bottom ( should be a tight fit, so twisting & pulling simultaneously can help )
• Remove LED puck from inside bottom of cap
• Remove plastic wrap LED puck is contained in ( if included )
• Remove white/clear battery protector tab to activate unit
• Press on/off button under puck to turn on/off & switch between solid colors & modes
• Place puck back into bottom cap and slide back on bottom of container nice and tight so that the puck is wedged well and doesn’t move when pressed.